Contracts & Post AwardFor suppliers8 min read

EU Declaration of Conformity for Machinery and Pressure Equipment: Contents and Template

What an EU declaration of conformity must contain under the Machinery Directive, the Machinery Regulation and the PED, who signs it, how long to keep it, and a template for a process skid.

TC

The ChemCapital Editorial Team

Procurement Intelligence · · Updated

Share
Blueprint style graphic: on the left a skid with a pump and a vertical vessel, labelled machinery and pressure, joined by one line into an EU declaration of conformity page with seven numbered lines and a signature box highlighted in amber
A skid that is both machinery and pressure equipment gets one declaration that covers both laws. Image credit: ChemCapital

An EU declaration of conformity is the one page document in which you, the manufacturer, state under your sole responsibility that a machine or a piece of pressure equipment meets every EU law that applies to it. Its contents are fixed by law: for machinery by Annex II of the Machinery Directive (Annex V of the Machinery Regulation from 20 January 2027), and for pressure equipment by Annex IV of the Pressure Equipment Directive (PED).

Buyers check it at goods in and keep it in the equipment records. A process skid with pumps, motors and a pressure vessel usually falls under both laws, and then you issue one declaration that covers both. Below is what each declaration must contain, who signs it, how long you keep it, and a template you can adapt.

Why this matters now

The Machinery Regulation, Regulation (EU) 2023/1230, applies from 20 January 2027 and replaces the Machinery Directive 2006/42/EC [1]. It has been amended twice since 2023, most recently by a digital omnibus in July 2026. As of November 2026, the consolidated text still applies from 20 January 2027 and repeals the Directive from that date [2].

So a skid quoted today may be delivered under one law and handed over under another. If your order book runs into 2027, check which declaration each unit needs before you print it. Our guide to the EU Machinery Regulation and process skids covers the wider changes.

In Great Britain, the government says machinery and pressure equipment can carry either the UKCA or the CE marking. Legislation in force from 1 October 2024 continues to recognise CE marking, and the guidance gives no end date [3]. That guidance does not say whether a declaration to the new Machinery Regulation will be accepted in Great Britain, so check before you ship. This is general information, not legal advice; check the current text before you rely on it.

Access real procurement opportunities from global buyers

Join ChemCapital to get discovered by verified procurement teams across pharmaceutical, chemical, and industrial manufacturing.

List your company

What a machinery declaration must contain (Directive 2006/42/EC)

Annex II of the Directive lists ten items for the EC declaration of conformity of the machinery [4]:

  1. Business name and full address of the manufacturer and, where appropriate, its authorised representative.
  2. Name and address of the person authorised to compile the technical file, who must be established in the EU.
  3. Description and identification of the machinery: generic name, function, model, type, serial number and commercial name.
  4. A sentence expressly declaring that the machinery fulfils all relevant provisions of the Directive and, where appropriate, a similar sentence for other directives it complies with, using their Official Journal references.
  5. Where appropriate, the notified body that carried out the EC type examination, and the certificate number.
  6. Where appropriate, the notified body that approved the full quality assurance system.
  7. Where appropriate, the harmonised standards used.
  8. Where appropriate, other technical standards and specifications used.
  9. Place and date.
  10. Identity and signature of the person empowered to draw up the declaration on behalf of the manufacturer or its authorised representative.

The declaration must be typewritten or handwritten in capital letters, follows the same language rules as the instructions, and the original is kept for at least 10 years from the last date of manufacture [4].

Item 2 catches UK and other non EU makers. The person who can compile the technical file must be established in the EU, so name a real EU address, not your own works.

Partly completed machinery: the declaration of incorporation

Partly completed machinery is an assembly that is almost a machine but cannot perform a specific application on its own; the Directive gives a drive system as the example [5]. It gets a declaration of incorporation and assembly instructions, not a declaration of conformity. Both travel with it until it is built into the final machine, and then become part of that machine's technical file [6].

The declaration of incorporation lists the essential requirements you applied and fulfilled. It undertakes to send information to national authorities on a reasoned request, and says the item must not be put into service until the final machine has been declared in conformity [4]. The integrator who builds it into a skid then issues the declaration of conformity for the whole.

What a pressure equipment declaration must contain (PED 2014/68/EU)

Annex IV of the PED sets a model structure in eight items [7]:

  1. Pressure equipment or assembly: product, type, batch or serial number.
  2. Name and address of the manufacturer and, where applicable, its authorised representative.
  3. A statement that the declaration is issued under the sole responsibility of the manufacturer.
  4. Object of the declaration, identified so it can be traced (an image may be added), with a description, the conformity assessment procedure followed and, for an assembly, the constituent equipment and their procedures.
  5. A statement that the object conforms to the relevant Union harmonisation legislation.
  6. References to the harmonised standards or other technical specifications used.
  7. Where applicable, the notified body's name, address and number, and the certificate references.
  8. Additional information, then "signed for and on behalf of", place and date, name, function and signature.

The declaration must be kept up to date and translated into the language required by each Member State where the equipment is sold. Where more than one EU law requires a declaration, you issue a single one covering all of them [8]. The manufacturer draws it up and affixes the CE marking, then keeps it with the technical documentation for 10 years after placing on the market [9].

Article 6 ties the declaration and CE marking to equipment under Article 4(1) and (2). Equipment under Article 4(3) is instead designed and made to the sound engineering practice of a Member State [9], so it gets neither under the PED; see our guide to PED sound engineering practice. To find the category, and so the module, see PED and PER 2016 categories.

Comparison of the three declarations a skid maker meets: the machinery declaration of conformity, the declaration of incorporation for partly completed machinery and the PED declaration of conformity, showing when each is used, CE marking, key content, who signs and how long to keep it

What changes on 20 January 2027

Under the Machinery Regulation, the EU declaration of conformity states that the essential requirements in Annex III have been met. It follows the model in Annex V Part A, is kept continuously updated, is translated as each Member State requires, and becomes a single declaration where several EU laws apply [10]. Partly completed machinery gets an EU declaration of incorporation to Annex V Part B [10].

Three practical changes for skid makers:

  • The layout moves closer to the PED model. Annex V Part A has a product line, the manufacturer, a sole responsibility statement, the object of the declaration, the legislation, the standards or common specifications, any notified body and module, then additional information and signature [11]. One combined declaration for a skid becomes easier to lay out.
  • Digital access is allowed. The declaration either goes with the machine or the instructions give an internet address or machine readable code where it can be read. A digital copy stays online for the expected lifetime of the machine, and for at least 10 years [10].
  • Retention runs from placing on the market. Keep the technical documentation and declaration for at least 10 years after the machine is placed on the market or put into service [10].

This is general information, not legal advice; check the current text before you rely on it.

Who signs, and what buyers check

The Directive asks for the identity and signature of the person empowered to draw up the declaration for the manufacturer or its authorised representative [4]. The PED and the Regulation ask for the name, function and signature of the person signing on the manufacturer's behalf [7] [11]. In practice that is a director or a nominated technical manager with written authority. Write the name and function in full, so a buyer can see who signed.

At goods in, a careful buyer checks five things. The serial number matches the nameplate. Every directive or regulation is listed. The PED module and notified body number match the certificate. The standards are current editions. The date is no earlier than the final inspection. If you track documents against a purchase order, ChemCapital's RFQ to purchase order workflow and order tracking keep the declaration with the order it belongs to.

Template: combined declaration for a process skid (Directive, until 19 January 2027)

ItemWhat to write
TitleEC declaration of conformity of the machinery (Directive 2006/42/EC), also covering Directive 2014/68/EU
ManufacturerBusiness name and full address
Technical fileName and address of the person in the EU authorised to compile it
MachineGeneric name, function, model, type, serial number, commercial name
Machinery sentenceDeclares that the machinery fulfils all relevant provisions of Directive 2006/42/EC
PED sentenceDeclares conformity of the pressure assembly with Directive 2014/68/EU, with category, module and notified body number and certificate
Other lawsEach further directive or regulation that applies, with its Official Journal reference
StandardsHarmonised standards used, with year; other specifications used
Place and dateTown, and a date after final inspection
SignatureName, function and signature of the empowered person

Number each declaration and tie that number to the serial number. Keep the signed original, and send buyers a copy with the manufacturer's data book.

Practical example

Illustrative only. You build a chemical dosing skid: two metering pumps with motors, a control panel, and a 300 litre pressurised buffer vessel that your engineer has classed as PED category II, assessed under module A2 with a notified body. The skid ships in March 2027.

Because it reaches the market after 19 January 2027, the machinery side follows the Machinery Regulation. You issue one EU declaration of conformity to Annex V Part A. It lists Regulation (EU) 2023/1230 and Directive 2014/68/EU, the vessel's category, module and notified body number, the standards used and the serial number SK2701. The pump drive units came in as partly completed machinery with their makers' declarations of incorporation and assembly instructions; those now sit in your technical file for the skid. If an identical skid had shipped in December 2026, it would carry a declaration to Annex II of the Directive instead.

Where ChemCapital fits

A supplier who can show a clean declaration template and a named signatory at quotation stage gives the buyer one less thing to chase, and that helps when bids are close. Our guide to the vendor document requirement list shows where the declaration sits in a buyer's document schedule.

Ready to show buyers your compliance paperwork is in order? List your company on ChemCapital. It is free to start.

Frequently asked questions

What must an EU declaration of conformity contain?

For machinery under Directive 2006/42/EC: the manufacturer, the person in the EU who compiles the technical file, the machine's identification, a sentence declaring conformity with the Directive and any other directives, any notified body, the standards used, place and date, and the identity and signature of the empowered person. The PED model in Annex IV is similar, adding the conformity assessment procedure and certificate references.

Who signs a declaration of conformity?

A person empowered to sign on behalf of the manufacturer or its authorised representative, usually a director or nominated technical manager. The declaration shows their name and function, and the manufacturer takes responsibility for compliance by issuing it.

Do you need one declaration or two for a skid covered by the Machinery Directive and the PED?

One. Where more than one EU law requires a declaration of conformity, the manufacturer issues a single declaration covering all of them and lists each one. The Machinery Regulation keeps the same rule from 20 January 2027.

What is a declaration of incorporation?

It is the declaration for partly completed machinery: an assembly that is almost a machine but cannot perform a specific application on its own, such as a drive system. It lists the essential requirements applied, undertakes to send information to national authorities on request and says the item must not be put into service until the final machine has been declared in conformity. It travels with the item, with the assembly instructions, until the item is built into the final machine.

How long must a declaration of conformity be kept?

At least 10 years. The Machinery Directive counts from the last date of manufacture, the PED from placing on the market, and the Machinery Regulation from placing on the market or putting into service.

Informational only, not procurement or legal advice. Cited names, frameworks, and statistics belong to their respective owners.

Share this article

Send it to a colleague or stakeholder.

Access real procurement opportunities from global buyers

Join ChemCapital to get discovered by verified procurement teams across pharmaceutical, chemical, and industrial manufacturing.

List your company

Related articles