209 articles
Procurement Insights
Intelligence grounded in evidence for industrial, pharmaceutical, and chemical procurement teams.

PFD vs P&ID vs Block Flow Diagram: Which Drawing a Quote Needs
What a block flow diagram, a PFD and a P&ID each show and leave out, when each exists, and which one a supplier needs to price equipment at each estimate stage.

Heat Exchanger Datasheet Explained Line by Line (TEMA)
What each line of the TEMA shell and tube specification sheet means, which lines the buyer must fill, and which the thermal designer returns with the quote.

PED Sound Engineering Practice: What Applies Below Category I
What sound engineering practice means under the Pressure Equipment Directive and the UK regulations, what SEP equipment must and must not carry, and what buyers should still ask for.

Preferred Supplier List vs Approved Vendor List: A Buyer's Template
The difference between an approved vendor list and a preferred supplier list, how the two should work together, how to maintain them, and a template with columns.

Supplier Change Notification: What Equipment Vendors Must Tell You
Which supplier changes a regulated buyer needs to hear about, how to write the clause into a quality agreement or order, sensible notice periods, and a template.

21 CFR Part 11 and Electronic Signatures on Procurement Records
A plain guide to 21 CFR Part 11 for buyers at GMP sites: which purchasing and vendor records fall in scope, what electronic signatures must show, and what to check in a tool.

ALCOA+ Data Integrity, Applied to Procurement and Vendor Records
The nine ALCOA+ attributes in plain words, and how each applies to the RFQs, quotes, bid evaluations, orders and vendor documents behind GMP equipment.

PMI Testing: When to Require It on a Purchase Order
What positive material identification can and cannot detect, when to require it, how much to test, and how to write PMI into a purchase order and inspection plan.

Commissioning and Qualification: ASTM E2500 vs Traditional IQ OQ PQ
How the science and risk based ASTM E2500 approach differs from traditional IQ, OQ and PQ, who does what, how vendor tests can be reused, and what to put in the RFQ.

How to Find and Vet Suppliers for Process Equipment
Where to find makers of engineered process equipment, and the quick checks that turn a long list into a shortlist worth sending an RFQ to.

Equipment Cost Estimating: How to Get Budget Prices for Exchangers, Vessels and Pumps
Five ways to get budget prices before firm quotes, how accurate each can be by estimate class, what drives the price of each equipment type, and a worked example.
