29 articles

Supplier Qualification

Articles on supplier qualification for industrial procurement teams.

Blueprint style graphic of a vessel drawing beside a checklist, with a magnifier highlighting a drain valve at the low point in amber
Supplier QualificationFor procurement

Design Qualification (DQ) for GMP Equipment: What It Is and What the Vendor Provides

Design qualification is the documented check that a proposed equipment design meets the URS and GMP before it is built. Here is where DQ sits in EU GMP Annex 15, what evidence the vendor supplies, and a DQ checklist.

7 min read
Blueprint style graphic of a matrix grid linking URS rows to columns for design, FAT, IQ, OQ and PQ, with one complete row highlighted in amber
Supplier QualificationFor procurement

Requirements Traceability Matrix for GMP Equipment: From URS to PQ

A requirements traceability matrix links every URS line to the design document that meets it and the test that proves it, from DQ through FAT, SAT, IQ, OQ and PQ. Here is how to build one, with a template.

7 min read
Blueprint style graphic of an equipment data plate with marking boxes, routed to three destination panels for Great Britain, Northern Ireland and the European Union, with Great Britain highlighted in amber
Supplier QualificationFor suppliers

UKCA or CE Marking for Equipment Sold into Great Britain in 2026

As of November 2026, Great Britain accepts CE or UKCA marking for machinery and pressure equipment. Here is what suppliers still have to get right: approved bodies, the UK importer, labels and the declaration.

7 min read
Blueprint style graphic of an audit route through a workshop plan, from goods in to dispatch, with a clipboard and the test area highlighted in amber
Supplier QualificationFor suppliers

How to Prepare for a Customer Quality Audit as an Equipment Manufacturer

A practical guide for equipment makers facing a customer or vendor audit: the documents to have ready, how to run the walk through, the findings auditors raise most often and how to close them properly.

7 min read
Blueprint style graphic of an isolator with glove ports on a cleanroom floor plan, airflow arrows from above and the contamination control strategy document beside it highlighted in amber
Supplier QualificationFor procurement

EU GMP Annex 1 for Equipment Buyers: What Changes in the RFQ

The 2022 EU GMP Annex 1 paragraphs that change how you specify sterile manufacturing equipment, mapped to the lines to add to your URS and RFQ, with the evidence to ask suppliers for.

12 min read
Blueprint style graphic of a SIL certificate card with fields for device and version, SIL capability, systematic capability, failure data, safety manual and assessor, linked to a transmitter and a valve, with the conditions field highlighted in amber
Supplier QualificationFor procurement

SIL Certificates: What to Check Before You Buy Safety Instruments and Valves

A SIL certificate says a device can be used in a safety function up to a stated level, under conditions. It does not make your loop SIL 2. Here is what to check before you buy.

7 min read
Blueprint style graphic of a ladder of four PED categories, I to IV, each step listing its allowed conformity assessment modules, with module H1 at category IV highlighted in amber
Supplier QualificationFor suppliers

PED Conformity Assessment Modules Explained for Manufacturers

Category decides which PED modules you may use; your production pattern decides which one you should use. Here is every module, what the notified body does, and how to choose.

7 min read
Blueprint style graphic: two lists side by side, labelled EPC qualified suppliers and owner vendor list, with a supplier card that must pass through both before reaching an RFQ envelope, the owner list highlighted in amber
Supplier QualificationFor suppliers

EPC Contractor Vendor Registration: How to Get on the Vendor List

How EPC contractors register and qualify equipment vendors, what to prepare, and how to get onto the owner's approved vendor list as well as the contractor's.

7 min read
Blueprint style graphic: a vendor registration form with ticked rows for company, tax, bank, insurance, ISO 9001, sanctions and modern slavery, the bank row highlighted in amber, beside a folder labelled registration pack
Supplier QualificationFor suppliers

Vendor Registration Forms: What Buyers Ask Equipment Suppliers For

The company, tax, bank, insurance, certificate and compliance details buyers ask for when registering an equipment supplier, why they ask, and a checklist to build your pack.

7 min read
Blueprint style graphic: a process skid with a pump and a vessel, and a control panel door whose nameplate shows the line SCCR 35 KA highlighted in amber, with labels for UL 508A, NFPA 79 and the NEC around it
Supplier QualificationFor suppliers

Selling Process Skids into the US: UL 508A Panels, NFPA 79 and the NEC

What a European skid maker needs for the US: a UL 508A listed panel, NFPA 79 wiring, NEC installation, a short circuit current rating, and field evaluation as the fallback.

9 min read
Blueprint style graphic: a horizontal pressure vessel with one nameplate split into two halves, an ASME style U panel on the left and a CE panel on the right, with US and EU route labels and the shared nameplate outlined in amber
Supplier QualificationFor suppliers

ASME U Stamp vs PED: Selling Pressure Equipment into the US and Europe

How the ASME U stamp and the PED each certify pressure vessels, who inspects, how long certificates last, and how to build one vessel that satisfies both.

10 min read
Blueprint style graphic: four input cards labelled directory, trade show, company data and web search, each piped through a valve into a funnel where a crowd of candidate dots passes a filter screen and leaves as three, branching into a shortlist of three supplier cards, each with a green tick
Supplier QualificationFor procurement

GlobalSpec, Thomasnet and IndustryNet Alternatives for Process Equipment Buyers

Five alternatives to GlobalSpec, Thomasnet and IndustryNet for finding process equipment suppliers, compared side by side with all three, plus a method for a checked shortlist.

11 min read
Organised process equipment fabrication shop seen from a raised walkway, with stainless steel skid frames under assembly in marked bays, pipe spools on racks and welding bays with fume extraction
Supplier QualificationFor procurement

Supplier Audit Checklist for Process Equipment Fabricators

A practical checklist for auditing a vessel, skid or pipework fabricator before award: what to request in advance, what to check on the shop floor, red flags, scoring and follow up.

8 min read
Close up of a TIG welded circumferential butt weld joining two sections of polished stainless steel pipe held in a fixture, with a TIG torch beside it
Supplier QualificationFor everyone

WPS, PQR and Welder Qualification: What Equipment Buyers Should Check

What a welding procedure specification, a procedure qualification record and a welder qualification each prove, how ISO 15614, ISO 9606 and ASME IX differ, and what to check before fabrication starts.

7 min read
Graphic of a weighted scoring matrix: vendors A, B and C total 80.3, 80.6 and 87.0, and vendor D is excluded after failing a mandatory check
Supplier QualificationFor procurement

Supplier Evaluation Matrix for Equipment Vendors (Template)

A weighted supplier evaluation matrix for engineered equipment: pass or fail checks, criteria and weights, a scoring scale with anchors, and a worked example.

5 min read
Graphic of nine tiles spelling ALCOA plus, each with a small icon, the four added attributes highlighted in green
Supplier QualificationFor everyone

ALCOA+ Data Integrity, Applied to Procurement and Vendor Records

The nine ALCOA+ attributes in plain words, and how each applies to the RFQs, quotes, bid evaluations, orders and vendor documents behind GMP equipment.

6 min read
A validation engineer seen from behind with a tablet, checking a stainless steel vessel in a clean area
Supplier QualificationFor everyone

Commissioning and Qualification: ASTM E2500 vs Traditional IQ OQ PQ

How the science and risk based ASTM E2500 approach differs from traditional IQ, OQ and PQ, who does what, how vendor tests can be reused, and what to put in the RFQ.

5 min read
Graphic of an approved supplier list containing a smaller ranked preferred list, with supplier rows marked by coloured status markers
Supplier QualificationFor procurement

Preferred Supplier List vs Approved Vendor List: A Buyer's Template

The difference between an approved vendor list and a preferred supplier list, how the two should work together, how to maintain them, and a template with columns.

4 min read
Graphic of a timeline of audit trail entries, each recording who, what, when and why, with one change from an old to a new value highlighted
Supplier QualificationFor everyone

Audit Trail Requirements in GMP: What a Compliant Record Must Capture

What EU Annex 11, 21 CFR Part 11 and MHRA guidance require of an audit trail, what audit trail review means in practice, and worked entries for a procurement record.

5 min read
A busy fabrication shop floor seen from a mezzanine, with stainless steel vessels at different stages of build
Supplier QualificationFor procurement

How to Find and Vet Suppliers for Process Equipment

Where to find makers of engineered process equipment, and the quick checks that turn a long list into a shortlist worth sending an RFQ to.

6 min read
A stainless steel process skid with a control panel and an HMI touchscreen in a clean room, the screen showing abstract graphics only
Supplier QualificationFor everyone

GAMP 5 Software Categories for Bought In Skids and Control Systems

GAMP 5 software categories 1, 3, 4 and 5 in plain words, mapped to the skids, instruments and control systems a buyer actually orders, with what to ask suppliers for.

6 min read
Graphic of an RFI questionnaire on a clipboard beside a funnel that narrows twelve suppliers to a shortlist of four for the RFQ
Supplier QualificationFor procurement

RFI Template for Equipment Suppliers (Request for Information)

When to send a request for information before an RFQ for process equipment, what to ask, how to score the replies, and a template you can copy.

4 min read
A quality reviewer at a laptop in a pharmaceutical office, with a GMP manufacturing area visible through a glass wall, screen content abstract
Supplier QualificationFor everyone

21 CFR Part 11 and Electronic Signatures on Procurement Records

A plain guide to 21 CFR Part 11 for buyers at GMP sites: which purchasing and vendor records fall in scope, what electronic signatures must show, and what to check in a tool.

7 min read
Stainless steel hygienic valves and clamp fittings laid out on an inspection bench in a fabrication shop, beside an inspection report and a pressure gauge
Supplier QualificationFor suppliers

How to Get on a Pharmaceutical Company's Approved Vendor List (and Stay On It)

What an approved vendor list is, how pharma buyers qualify equipment suppliers, what to have ready, why vendors stall, and how to get invited in the first place.

12 min read
A sanitary filter housing, a pressure gauge, material certificates and a printed questionnaire on an inspection bench in a stainless steel fabrication shop
Supplier QualificationFor suppliers

The Supplier Qualification Questionnaire: How an Equipment Vendor Answers It Without Losing Weeks

What GMP buyers check in a supplier questionnaire, what evidence to attach to each section, and an answer kit that returns 120 questions in five working days.

9 min read
A stainless steel jacketed process vessel with a top mounted agitator drive, jacket nozzles and a bolted manway, standing on legs in a clean equipment hall
Supplier QualificationFor everyone

User Requirement Specification for Process Equipment: URS Template

How to write a user requirement specification that suppliers can quote against: URS vs FS and DS, testable requirements, a URS template and a jacketed vessel example.

7 min read
A skid mounted jacketed stainless steel process vessel with an agitator drive, load cells and hygienic pipework, standing in a clean fabrication hall.
Supplier QualificationFor everyone

IQ OQ PQ Explained: What to Require from Equipment Vendors

DQ, IQ, OQ and PQ explained from the buyer's side: what EU GMP Annex 15 expects, what the equipment vendor should supply, and how to write it into the purchase order.

7 min read
A stainless steel hygienic centrifugal pump with clamp connections on polished stainless pipework in a dairy processing plant
Supplier QualificationFor everyone

EHEDG vs 3A: Hygienic Design Certification for Food and Pharma

What EHEDG and 3A certification each involve, what the schemes charge, how to check a supplier's certificate, where ASME BPE fits and what to ask for in the RFQ.

7 min read
Quality auditor in a cleanroom gown inspecting a stainless steel process skid
Supplier QualificationFor procurement

A Practical Supplier Qualification Checklist for Pharmaceutical Procurement

Use this practical, risk based supplier qualification checklist to assess pharma suppliers, document control expectations, and reduce delivery and quality risk.

3 min read